Directions: Clean each wheel and caliper using BILBERRY WHEEL CLEANER or REVELATION thoroughly and suitably prepare the surface removing ALL contamination. For best results, before application, polish the wheels and calipers to a high gloss finish using either REDEMPTION or PERFECT POLISH. Always apply ceramic products in a sheltered environment.
Remove the cap on the bottle and apply a few drops of ENIGMA LEGACY WHEEL & CALIPER onto a microfibre applicator or a suede applicator cloth which is used in conjunction with the Angelwax foam block. Apply the coating to one wheel/caliper at a time. Once the wheel/caliper has been coated, allow the coating to cure to the wheel/caliper surface for 2 minutes before removing the residue with a clean, dry, microfibre cloth. Once this has been completed, use a buffing towel to create a high gloss finish.
The curing time of two minutes is dependent on a temperature of approximately 20°c/68°f.
The coating may take longer to cure if applied in colder temperatures and the coating will cure more quickly in a warmer environment.
Top Tip: If possible, do not use the vehicle for approximately 2 to 4 hours after the coating has been applied as this will help the crosslink density of the coating to increase. This will maximise the surface properties and increase the durability of the coating.
Designed, Formulated and Manufactured in the UK by Angelwax Ltd
H304: May be fatal if swallowed and enters airways.
H314: Causes severe skin burns and eye damage.
P102: Keep out of reach of children.
P260: Do not breathe dust/fume/gas/mist/vapours/spray.
P301+P310: IF SWALLOWED: Immediately call a POISON CENTER or doctor.
P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes.
Remove contact lenses, if present and easy to do. Continue rinsing.
P331: Do NOT induce vomiting.
P501: Dispose of contents/container to hazardous or special waste collection
point, in accordance with local, regional, national and/or international regulation.