Description
Directions: Clean the exterior of the vehicle thoroughly and suitably prepare the paint surface removing ALL contamination. For outstanding results, hand or machine polish the paint surface removing any swirl marks and paintwork imperfections.
Before applying ENIGMA LEGACY, ensure all surfaces are cool to the touch. Degrease all surfaces to be coated using Angelwax STRIPPED-EASE panel wipe.
Remove the cap on the bottle and apply a few drops of ENIGMA LEGACY onto a suede applicator cloth which is used with the foam block and apply the coating to one panel at a time. Once the panel has been coated, allow the ENIGMA LEGACY to bond with the paint surface for 2 minutes before removing the residue with a clean, dry, microfibre cloth. Once this has been completed, use a buffing towel to create a high gloss finish.
The curing time of two minutes is dependent on a temperature of approximately 20°.
The coating may take longer to cure if applied in colder temperatures and the coating will cure more quickly in a warmer environment.
Top Tip: If possible, do not use the vehicle for approximately 2 to 4 hours after the coating has been applied as this will help the cross-link density of the coating to increase. This will maximise the surface properties and increase the durability of the coating.
H304: May be fatal if swallowed and enters airways.
H314: Causes severe skin burns and eye damage.
P102: Keep out of reach of children.
P260: Do not breathe dust/fume/gas/mist/vapours/spray.
P301+P310: IF SWALLOWED: Immediately call a POISON CENTER or doctor.
P305+P351+P338: IF IN EYES: Rinse continuously with water for several minutes.
Remove contact lenses, if present and easy to do. Continue rinsing.
P331: Do NOT induce vomiting.
P501: Dispose of contents/container to hazardous or special waste collection
point, in accordance with local, regional, national and/or international regulation.
Warning: